Fitting Of The Dahl Lock Plate On Wheelchair - Paravan PR heavy duty User Manual

Table of Contents

15.9.2

Fitting of the Dahl lock plate on wheelchair

In order to fit the Dahl Lock plate an additional wheelchair specific

adaptation kit is required. It contains special nut and plastic spacers,

which are to be fitted inside the battery box.

① Angle plate for Dahl system (PV-Art. Nr: 000033185)

② Side mounting for Dahl system (PV-Art. Nr: 000034091)

③ 8 mm intermediate piece for locking plate 10069 DAHL

(PV-Art. Nr: 000010131)

④ Locking rail for Dahl-System (PV-Art. Nr: 000033184)

⑤ Oval-head screw ISO 7380 - M8 x 12

⑥ Socket cap screw DIN 912 - M12 X 20

⑦ Countersunk screw TORX ISO 14581 - M8 x 35 -14.9

⑧ Hexagon nut ISO 4032 - M8

To install the Dahl Locking plate use PARAVAN Adaption kit, article

number 33187

To assemble the adapter set of the Dahl docking station, you need

two Allen keys, size 5 and size 10, a Torx 27 and a wrench SW 13.

Tighten the Torx screws to a torque of 16-18 Nm.

The panelling must first be removed in order to mount the Dahl

docking station to the Paravan wheelchair.

Loading and transporting your electric wheelchair

Fig. 42: Paravan Kit for Dahl docking station

Fig. 43: Torx 27

Table of Contents