14.2.7
Driving functions overview
⑤
②
①
④
Fig. 80: Driving functions
Fig. 81: Driving function blocked
Controls
Overview of the driving functions shown on the display of the control pa-
nel during driving, steering and braking actions of the power wheelchair.
>
Selected drive program/movement level ①
>
Maximum speed in the selected drive program ②
Key ③ to switch to a higher (+) or lower (-) drive program
>
>
Key ④ to change speed in the drive program
Display showing "trip" in kilometres and current speed (km/h) ⑤
③
>
Display is blank when a charging device is connected.
>
If the wheelchair is switched on, the charging status indicator is the
only thing shown.
>
First connect the charging lead for the charging device at the joystick,
then plug the power cable for the charging device into the socket.
L
If the power wheelchair is being charged via the charging socket
on the control panel, driving mode is automatically blocked.
111