Fig. 33: Positioning The Occupant Restraint For Use With Dahl Docking System Only - Paravan PR 35 User Manual

Table of Contents

The upper torso restraint belt must fit over the shoulder and across the chest as illustrated Fig. 47.

Restraint belts must be adjusted as tightly as possible consistent with use comfort.

Restraint belt webbing must not be twisted when in use.

Care should be taken when applying the occupant restraint to position the seatbelt buckle so that the

release button will not be contacted by wheelchair components during a crash.

Fig. 33: Positioning the occupant restraint for use with dahl docking system only

WA R N I N G

Positioning the occupant restraint for use with Dahl

docking system only

When using wheelchair with Dahl docking system, the

floor anchorage points for occupant restraint should

be located 10 - 60 mm outside wheels, on each side.

The pelvic belt must be worn low across the front of the pel-

vis - so that the angle of the pelvic belt is within the optional

or preferred zone of 30° - 75°. As shown a steeper (greater)

angle within the preferred zone, 45° - 75° is desirable i.e.

closer to, but never exceeding 75° degrees.

Loading and transporting the power wheelchair

Table of Contents