19.9.1
Procedure for charging the PR 35
①
Fig. 101: Plug in the charging cable
138
>
Turn off the PR 35.
>
Put the charger on a heat-insensitive surface, e.g. on the footrests.
>
Put the charger plug into the charging socket on the control panel.
>
Connect the charger to the power supply & The charging process
starts.
>
Check the charging status. & Are the storage batteries at full capaci-
ty? The charging process is complete.
>
Disassembly in reverse order.
L
Terminate the connection between the power at the power
socket and the charger.
Electrical system