Manual Release In Case Of Electric Failure; Fig. 46: Manual Release Step 1; Fig. 47: Manual Release Step 2 - Paravan PR 35 User Manual

Table of Contents

13.5.7

Manual release in case of electric failure

A manual emergency release is located at the front edge of the

docking station.

Move wheelchair forward to remove the pressure on the lock pin

and push the red release arm to one side and hold it there while the

wheelchair moves away.

A cable-activated manual operating lever can also be fitted

(accessory). The red release arm is also pushed to one side and

should be held there whilst the wheelchair moves away.

If the described manual release procedures fails, an emergency

release tool made from red plastic comes with each docking station.

Move wheelchair forward to remove the pressure on the lock pin

Place the emergency release tool in the gap between the locking

plate and the docking station.

Push the release tool and wheelchair forward until the locking pin

has been forced down - after which the wheelchair can reverse out

of the docking station.

Please also refer to Dahl Engineering instructions for installa-

tion, use and maintenance for Dahl Docking Station MK II and

VarioDock™ systems.

Loading and transporting the power wheelchair

Table of Contents