19.9.2
The charger
The purpose of the charger is to automatically charge the storage
batteries. The charger is housed in splash-proof sheet-steel casing. It
complies with the guidelines and protection requirements of the:
>
Low Voltage Directive 2006/95/EC,
>
Electromagnetic Compatibility Directive 2004/108/EC.
L
Read the operating instructions included separately with the
charger.
19.9.3
Installing the charger, installation location
>
Only install in dry rooms.
>
Do not cover casing openings.
>
Ensure sufficient ventilation.
>
Do not install near to radiant heaters (e.g. under lamps, on heaters
etc.)
L
During the charging process, put the charger on the foot
supports of the wheelchair.
Electrical system
Fig. 102: Set up charger
139