Paravan PR 35 User Manual page 128

Error message
Brake error / Bremsen
Gone to sleep / Ruhemo-
dus
128
Meaning
This message appears when the control system detects a problem with the magnetic
brakes or their connections.
Check the magnetic brakes, cables and connections in the control system.
Check that the motor brakes have not come uncoupled.
Motor error / Motorfehler
This message appears when the control system detects that the connection to a mo-
tor has been interrupted.
Check the motors, cables and connections in the control system.
This message appears when the control system has been inactive for longer than the
[time] period defined by the "SleepTimer" parameter.
Gyro disconnected / Gyro ni. angeschl
This message appears when the control system detects that the gyro module is no
longer connected.
Reconnect the gyro module and restart the system.
Bad cable / Kabelfehler
This message appears when the control system detects an error in the cabling that
enables the modules to communicate with one another.
Check whether the cables or connections have been interrupted or squashed/jammed.
If there is any visible damage to the cables, replace them and switch the control unit
off and on again. Please speak to customer service about any replacements you may
need.
Troubleshooting