Details regarding the pads on the arm supports, seat and rear, description of the frame
Technical equipment
Back pads
Pad material:
Thickness:
Compression hardness:
Degree of hardness:
Density:
Cover:
* These are not cut foam cuboids and are therefore foamed as moul-
ded parts. And therefore measured in N in accordance with Din ISO
2439.
Frame
Pad material:
Coating:
Corrosion protection:
L
The seat pad and backrest pad are moulded foam parts
and are therefore not measurable in volumetric weight.
Moulded parts are measured in accordance with DIN stan-
dards. Measurement is made in N.
PR foam / MOI system
30 - 50 mm
77 kg/m3 ± 5%*
340 +/-25 N*
260 +/- 25 N
Matt black
S2 235 JR / S3 55 M2
Galvanisation
Galvanisation
145