10.6 Set the projection of the armrest
This work instruction applies to the right and left sides, if necessary the
rotational direction of the screw connection is laterally reversed!
Proceed as follows to check and set the projection of the armrest:
›
Loosen hexagonal cap nut.
›
Loosen hexagonal cap nut.
›
Move the armrest into the desired position.
›
Hexagonal cap nut and tighten approx. 8 Nm.
)
)
See section "8.3 Tools supplied"
56
Fig. 20: Armrest projection
Settings on the Biolution, mechanical