Set The Projection Of The Armrest; Fig. 19: Armrest Projection - Paravan WHEELCHAIR Series Operating Instructions Manual

10.6

Set the projection of the armrest

This work instruction applies to the right and left sides; it is possible that
the rotational direction of the screw connection is reversed!
Proceed as follows to check and set the projection of the armrest:
> Loosen the hexagonal cap nut .
> Loosen the hexagonal cap nut .
> Move the armrest  into the desired position.
> Tighten hexagonal cap nuts  and , approx. 8 Nm.
Settings on the power wheelchair, mechanical
1

Fig. 19: Armrest projection

2
3
57