10.6
Set the projection of the armrest
This instruction applies both to the left and right-hand side, though you
may need to rotate the screw in the opposite direction!
Take the following steps in the following sequence when setting the
projection of the armrest:
›
Loosen the hexagonal cap nut .
›
Loosen the hexagonal cap nut .
›
Adjust the armrest cushion to the desired position.
›
Tighten the hexagonal cap nut to about 8 Nm.
)
)
See Section "8.3 Tools provided"
58
Fig. 21: Armrest projections
Settings on your electric wheelchair; mechanical