The Charging Device - Paravan PR Heavy Duty User Manual

20.10.2 The charging device

The charging device is suitable for automatic charging of the accu-
mulators. The charging device is protected by a water-resistant sheet-
steel housing. This complies with the directives and safety regulations
of:
› 2006/95/EC Low Voltage Directive
› 2004/108/EC Electromagnetic Compatibility Directive
L L
Read the Users' Manual packed separately with the charging
device.
20.10.3 Positioning the charging device
› Use only in dry areas.
› Do not cover any openings on the housing.
› Ensure adequate ventilation.
› Do not place in the vicinity of devices giving off heat radiation (e.g.
under lamps, beside heating, etc.)
L L
During charging position the charging device on the foot
supports of the wheelchair.
120
21. Technical equipment
21.1 Technical data and dimensionsv
Orthopaedic seat K210 seating unit
Tilting
Back angle
Adjustment of foot position, optionally
Fußwinkelverstellung, optional
Head support
Weights
Empty weight including accumulators, without seat
Maximum load
Dimensions
Total width of chassis without seat
(Standard seat fully within the chassis width)
Total length without foot rests, forward movement.
Total length without foot rests, reverse movement.
Total height, standard seat, including head support
Total height, standard seat, without head support
Technical equipment Technical equipment
Backward 30°
Backward 67°
120mm
0° - 90°
5 positions
421 lbs
595 lbs
710 mm
1004 mm
950 mm
1240 mm
1050 mm
121