19.8.1 Procedure when charging the Biolution
Fig. 70: Plug in charging cable
Electrical unit
›
Switch off the Biolution.
›
Put the charger on a heat-insensitive base e.g. on the footrests.
›
Put the charger plug into the charging socket on the control panel.
›
Connect the charger to the power supply
-> The charging process starts.
›
Read the charging status.
-> Are the storage batteries at full capacity? The charging process is
complete.
›
Disassembly in reverse order.
L
L
Terminate the connection between the power at the power
socket and the charger.
109