20.8.1
Procedure for charging the PR 25
①
Fig. 109: Plug in the charging cable
Electrical system
>
Turn off the PR 25.
>
Put the charger on a heat-insensitive surface, e.g. on the footrests.
>
Put the charger plug into the charging socket on the control panel.
>
Connect the charger to the power supply & The charging process
starts.
>
Check the charging status. & Are the storage batteries at full capacity?
The charging process is complete.
>
Disassembly in reverse order.
L
After the charging process, terminate the connection between
the power at the power socket and the charger.
141