ABB REL 501-C1 2.5 Technical Reference Manual page 191

Supervision of AC input quantities (DA)
Parameter Range
EnDeadBP Off, On
EventMask U1 No Events,
Report Events
EventMask U2 No Events,
Report Events
EventMask U3 No Events,
Report Events
EventMask U4 No Events,
Report Events
EventMask U5 No Events,
Report Events
EventMask I1 No Events,
Report Events
EventMask I2 No Events,
Report Events
EventMask I3 No Events,
Report Events
EventMask I4 No Events,
Report Events
EventMask I5 No Events,
Report Events
EventMask U No Events,
Report Events
Default Unit Description
Off - Enable periodic dead band reporting S
Reporting of events to the station control
system (SCS) through LON port :
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA01 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA02 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA03 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA04 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA05 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA06 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA07 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA08 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA09 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA10 to the SCS
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA11 to the SCS
Chapter 11
Monitoring
179