ABB REL 501-C1 2.5 Technical Reference Manual page 190

178
Supervision of AC input quantities (DA)
Parameter Range
RepInt 0-3600
Step: 1
EnDeadB Off, On
DeadBand 0.0-99.9
Step: 0.1
EnIDeadB Off, On
IDeadB 0.0-99.9
Step: 0.1
EnDeadBP Off, On
Operation Off, On
Hysteres 0.0-9999.9
Step: 0.1
EnAlRem Off, On
EnAlarms Off, On
HiAlarm 0.0-9999.9
Step: 0.1
HiWarn 0.0-9999.9
Step: 0.1
LowWarn 0.0-9999.9
Step: 0.1
LowAlarm 0.0-9999.9
Step: 0.1
RepInt 0-3600
Step: 1
EnDeadB Off, On
DeadBand 0.0-9999.9
Step: 0.1
EnIDeadB Off, On
IDeadB 0.0-9999.9
Step: 0.1
Default Unit Description
0 s Time between reports for f in seconds. Zero
= Off (duration of time interval between two
reports at periodic reporting function. Setting
to 0 disables the periodic reporting)
Off - Enable amplitude dead band supervision for
f
1.0 Hz Amplitude dead band for f
Off Enable integrating dead band supervision for
f
5 Hz Integrating dead band for f
Off - Enable periodic dead band reporting f
Apparent power measuring channel S:
DA16-
Off - Operating mode for DAnn function
5.0 MVA Alarm hysteresis for S
On - Immediate event when an alarm is disabled
for S (produces an immediate event at reset
of any alarm monitoring element, when On)
Off - Set to 'On' to activate alarm supervision for S
(produces an immediate event at operation
of any alarm monitoring element, when On)
300.0 MVA High Alarm level for S
200.0 MVA High Warning level for S
80.0 MVA Low Warning level for S
50.0 MVA Low Alarm level for S
0 s Time between reports for S in seconds. Zero
= Off (duration of time interval between two
reports at periodic reporting function. Setting
to 0 disables the periodic reporting)
Off - Enable amplitude dead band supervision for
S
1.0 MVA Amplitude dead band for S
Off - Enable integrating dead band supervision for
S
10.0 MVA Integrating dead band for S
Chapter 11
Monitoring