Table of Contents
Advertisement
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
10.1.9 Lens Initialization
Lens initialization is used on the device equipped with motorized lens. The function can reset lens
when long time zoom or focus results in blurred image. This function varies according to different
models.
Manual Lens Initialization
Click
to operate lens initialization.
Auto Lens Initialization
Go to Configuration → System → Maintenance → Lens Correction to enable this function. You
can set the arming schedule, and the device will correct lens automatically during the
configured time periods.
10.1.10 Track Manually
In live view, manually select a target for the device to track.
Note
The function may not be supported by certain device models.
Steps
1. Click
on the toolbar of the live view page.
2. Click a moving object in the live image.
The device tracks the target and keeps it in the center of live view image.
10.1.11 Auxiliary Focus
Click
to realize automatic focus. This function is subject to the actual device model.
10.1.12 Quick Set Live View
It offers a quick setup of PTZ, display settings, OSD, and video/audio settings on live view page.
Steps
1. Click to show quick setup page.
2. Set PTZ, display settings, OSD, and video/audio parameters.
- For PTZ settings, see Lens Parameters Adjustment .
- For display settings, see Display Settings .
- For OSD settings, see OSD .
- For audio and video settings, see Video and Audio .
59
Advertisement
Table of Contents
