HIKVISION DS-2TD6267-75C4L/WY User Manual page 5

Thermal & optical bi-spectrum ptz network camera
Table of Contents

Advertisement

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulations
In the use of the product, you must be in strict compliance with the electrical safety regulations
of the nation and region.
Transportation
Keep the device in original or similar packaging while transporting it.
Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original wrapper. Transportation without the original
wrapper may result in damage on the device and the company shall not take any responsibilities.
Do not drop the product or subject it to physical shock. Keep the device away from magnetic
interference.
Power Supply
Please purchase the charger by yourself. Input voltage should meet the Limited Power Source
(24 VDC, or 24 VAC) according to the IEC62368 standard. Please refer to technical specifications
for detailed information.
Make sure the plug is properly connected to the power socket.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards
caused by overload.
DO NOT touch the bare metal contacts of the inlets after the circuit breaker is turned off.
Electricity still exists.
+ identifies the positive terminal(s) of equipment which is used with, or generates direct current.
- identifies the negative terminal(s) of equipment which is used with, or generates direct current.
Ensure correct wiring of the terminals for connection to an AC mains supply.
Battery
Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions. Il y a risque d'explosion si la batterie est remplacée par une
batterie de type incorrect. Mettre au rebut les batteries usagées conformément aux instructions.
The built-in battery cannot be dismantled. Please contact the manufacture for repair if
necessary.
For long-term storage of the battery, make sure it is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
This equipment is not suitable for use in locations where children are likely to be present.
Safety Instruction
iv

Advertisement

Table of Contents
loading

Table of Contents