Set Scheduled Tasks; Set Combined Path - HIKVISION DS-2TD6267-75C4L/WY User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Active Zoom Ratio
When the actual zoom ratio is less than the set active zoom ratio, the set area cannot be
covered. When the actual zoom ratio is greater than the set active zoom ratio, the privacy
mask is valid. The maximum value of active zoom ratio depends on the camera module.
Note
Active zoom ratio is only supported for the PTZ channel.
7. Repeat the steps above to set other privacy masks.
8. Check Enable Privacy Masks.

9.10 Set Scheduled Tasks

You can set the device to perform a certain task during a certain period.
Steps
1. Go to Configuration → PTZ → Scheduled Tasks .
2. Check Enable Scheduled Task.
3. Select the task type from the drop-down list and draw a time bar on the schedule table.
4. Click the set time bar and set the action ID and smart event or VCA type.
Note
Not all task types support the settings of action ID and smart event or VCA function. Please take
the actual product for reference.
5. Repeat step 3 and step 4 to set more than one scheduled tasks.
6. Set Park Time. During the set task period, if you operate the device manually, the scheduled task
will be suspended. When the manual operation is over, the device will continue to perform the
scheduled task after the set park time.
Note
Up to 30 time periods can be configured per day.
7. Click Save.
Note
If you want to clear all scheduled tasks, go to Configuration → PTZ → Clear Config , check Clear
All Scheduled Tasks, and click Save.

9.11 Set Combined Path

It offers the option to add multiple types of VCA scanning tasks to one combination path. Setting
the combined path as a scheduled task or a park action is convenient to manage multiple VCA
functions in different circumstances.
53