Table of Contents
Advertisement
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Click
to start full screen mode and press ESC button to exit.
10.1.6 Conduct Regional Focus
You can enable the function to focus on certain area.
Steps
1. Click
to enable regional focus.
2. Drag the mouse on the live view to draw a rectangle as the desired focus area.
3. Click
to disable this function.
10.1.7 Light
Click
to turn on or turn off the illuminator.
10.1.8 Operate Wiper
For the device that has a wiper, you can control the wiper via web browser.
Note
Wiper operation and settings vary on device models.
Steps
1. Go to Configuration → PTZ → Wiper .
2. Select a wiper mode.
One
The wiper wipes one time when you click
Time
Cycle
The wiper works on schedule at set wiping interval. Click
wiping.
Duration
The schedule in which the wiper is ready to work.
Interval
The interval between two successive wiping actions.
Auto
Auto mode is only available for device that supports rain-sensing auto wiper.
In auto mode, the wiper works when rain drops on the window.
Note
on live view page.
58
on live view to start
Advertisement
Table of Contents
