SmartNode 5540E & 4140E Series User Manual
2. The SmartNode device can be attached to top hat NS 35/7.5 (35 H × 7.5 D mm) and NS 35/15 (35 H ×
15 D mm) section types of DIN rail (see
Install the device onto the DIN rail by inserting the upper DIN rail lip into the upper DIN rail clip slot
(see callout 1 on
figure 29
Attaching the SmartNode device to a DIN rail using the mounting clip
Figure 27. Mounting clip oriented for installation on DIN rail
figure
on page 73).
Figure 28. DIN rail types
H • Installing Optional DIN Rail Mounting Clip
28).
72