Table of Contents
Advertisement
SmartNode 5540E & 4140E Series User Manual
H • Installing Optional DIN Rail Mounting Clip
DIN rail mounting clip installation
1. With the SmartNode device oriented top side up, place the mounting clip as shown
figure
26.
2. Using a cross-tip screwdriver, install the two mounting screws (included with the DIN rail mounting clip
kit) to secure the clip.
Figure 26. DIN rail mounting clip location
Attaching the SmartNode device to a DIN rail using the mounting clip
Do the following:
1. Rotate the SmartNode device so the clip is oriented as shown in
figure 27
on page 72.
DIN rail mounting clip installation
71
Advertisement
Table of Contents
