Table of Contents
Advertisement
SmartNode 5540E & 4140E Series User Manual
Default IP Settings
SN5540E and SN4140E/2ETH Models:
ETH 0/0: DHCP Client
•
ETH 0/1: DHCP Server:
•
-
192.168.1.1 mask 255.255.255.0
or (smartnode.local)
-
SN4140E Models (with 1 Ethernet port only):
ETH 0/0:
•
-
192.168.200.20 | 255.255.255.0
DHCP Client
-
Default Login
Username: admin
Leave the password empty
Press the Enter key after the password prompt.
You are responsible for creating a new administrator account to maintain system secu-
rity. Patton Electronics accepts no responsibility for losses or damage caused by loss or
misuse of passwords. Refer to Chapter 4 "Accessing the CLI" , section "Selecting a secure
IMPORTANT
password" in the
Analog Port Pinout
FXS and FXO ports use an RJ-11 connector with 6 positions. The middle 2 positions (3 and 4) are used as
shown in
figure 1
on page 17 and described in
Pins not listed are not used.
Note
Default IP Settings
Trinity Command Line Reference Guide
table 2
on page 17.
1 • SN5540E/SN4140E Series Quick Start
for more details.
16
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartNode 5540E Series and is the answer not in the manual?