Table of Contents
Advertisement
SmartNode 5540E & 4140E Series User Manual
Congratulations, you have finished installing the SmartNode device! Now go to Chapter 5,
tion"
on page 37.
Installing the customer-provided DC power source
Do the following:
1. Verify that the power source is powered off and that it is compatible with the SmartNode device:
CAUTION
When applying direct DC power, it must be regulated 12 VDC ±5%, 1.25A
Note
minimum.
2. Determine which lead is positive and which lead is negative on the customer-supplied power adapter.
Installing the SmartNode device
Figure 11. Power LED
Figure 12. Power source leads installation
This device is not intended for use with power supplies
that provide high instantaneous current (for example: lead
acid batteries).
.
4 • SmartNode Installation
"Initial Configura-
35
Advertisement
Table of Contents
