Table of Contents
Advertisement
SmartNode 5540E & 4140E Series User Manual
The 2-Ethernet-port devices support:
•
Two Ethernet ports (WAN/LAN configurable) (IP Routing requires license to enable)
USB port
•
In addition, the eSBC supports:
IP routing including GRE, BGP, VPN, LACP
•
•
4 SIP to SIP calls (license upgradeable up to a total of 200)
SIP TLS/SRTP included
•
SIP Registrar included
•
Section
"SmartNode 5540E Series eSBC/IAD"
"On the products the following model code conventions apply:"
Series.
SmartNode 5540E Series eSBC/IAD
The SmartNode 5540E eSBC Series support up to 8 voice calls (FXS/FXO–VoIP) depending on the model
(see
figure
3) and up to 200 SIP-to-SIP calls (non-transcoded). By default there are 4 SIP to SIP calls enabled.
Additional calls can be enabled by loading SNSW-1B licenses (additional charge).
The SmartNode 5540E Series LEDs, ports, and button are shown in
page 21.
The type and number of ports on your SN5540E will depend on the model
Note
(SKU) that you purchased.
SmartNode devices overview
on page 20 provides more information on the device. Section
Figure 3. SN5540E LEDs, ports, and button
2 • General information
on page 21 describes the SmartNode 4140E
figure 3
and described in
table 3
on
20
Advertisement
Table of Contents
