Connecting To Dc Power; Ac Power Connection(S) - Patton SmartNode 10100 Series User Manual

SmartNode 10100 Series User Manual

Connecting to DC Power

The SN10100 DC models are furnished with one or two DC power connection ports. Each DC powered
SN10100 is supplied with two DC power cables.
To connect the SN10100 to DC power perform the following:
1. Connect one DC cable, supplied with the SN10100, as shown in
the SN10100.
2. Connect one lead of the DC power cable to the positive terminal of the DC power source, as shown in
Figure 8.
3. Connect the other lead of the DC power cable to the negative side of the DC power source.
4. Repeat steps 1-3 for the second power DC power source, if necessary.
Connecting Power
Figure 7. AC Power Connection(s)
2 • Hardware Installation
Figure 8, to the DC outlet at the rear of
24