Non-Video Event; Other Events; Configure Arming Schedule - HIKVISION DS-7600NI-K1 Series User Manual

6.5.3 Non-Video Event

Configure non-video event.
Steps
1. Go to Configuration → Device Management → Non-Video Event.
2. Select the device.
3. Select the Alarm Content.
4. Set the arming schedule. Refer to Configure Arming Schedule for details.
5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
6. Click Apply。

6.5.4 Other Events

Thermal Camera Detection
The device supports the event detection modes of thermal network cameras: fire detection,
temperature detection, etc. You can configure the arming schedule and linkage actions of the
selected event.
Before You Start
Add a thermal network camera to your device and make sure the camera is activated.
Steps
1. Go to Configuration → Event → Other Events .
2. Select a thermal camera detection event.
3. Set Camera.
4. Set the arming schedule. Refer to Configure Arming Schedule for details.
5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
6. Click Apply.

6.5.5 Configure Arming Schedule

Steps
1. Click Arming Schedule.
2. Choose one day of a week and set the time segment. Up to eight time periods can be set within
each day.
Note
Time periods shall not be repeated or overlapped.
Network Video Recorder User Manual
64