HIKVISION DS-7600NI-K1 Series User Manual page 62

2. Click Advanced Search.
3. Enter Network Segment.
4. Click Add.
Add Network Camera Through Plug-and-Play
If an inactive network camera or third party ONVIF camera is connected to your network, the video
recorder may automatically detect and add the camera, or notify you to manually add it.
Steps
1. Go to Configuration → Camera → Camera → IP Channel .
2. Click More.
3. Select Plug-and-Play.
4. Optional: Enable Auto Add Network Camera. The video recorder would automatically detect
and add the inactive network camera or third party ONVIF camera.
Note
If you turn off Auto Add Network Camera, when an inactive network camera or third party
ONVIF camera is connected to your network, the video recorder would automatically detect it
and notify you to add it.
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click of an added network camera.
Channel Port
Network Video Recorder User Manual
Figure 6-10 Enter Network Segment
Figure 6-11 Auto Add Network Camera
48