HIKVISION DS-7600NI-K1 Series User Manual page 65

Plug-and-Play
The camera is physically connected to the PoE interface. You can click
list to edit its parameters.
Manual
Add IP camera without physical connection via network cable.
4. Set other parameters, such as user name, password, and IP address.
Configure Advanced Camera Parameters
You can configure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Steps
1. Go to Configuration → Camera → Camera .
2. Click .
3. Set camera parameters like IP address, camera password, etc.
4. Click Apply.
Configure Channel Type
You can disable a PoE channel to additionally increase a normal IP channel resource.
Go to Configuration → Camera → Camera → PoE Binding Configuration , and set the PoE channel
as your desire.
Sort Channel Order
Go to Configuration → Camera → Camera . Refer to Sort Channel Order for details.
Network Video Recorder User Manual
Figure 6-13 PoE Binding Configuration
51
in the added device