HIKVISION DS-7600NI-K1 Series User Manual page 38

2. Click to add the camera.
Add Network Camera Manually
Before You Start
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Ensure the network camera is activated.
●
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click .
3. Set network camera parameters, including IP address, protocol, management port, etc. You can
check Use IPC Active Password to use the device password to add network camera(s).
4. Optional: Click Add More to add another network camera.
5. Click OK.
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Network Video Recorder User Manual
Figure 5-7 IP Camera Management Interface
Figure 5-8 Add Network Camera
24