HIKVISION DS-7600NI-K1 Series User Manual page 64

Short-distance (< 100 meters) network transmission via PoE interface.
Note
The PoE ports are enabled with the short distance mode by default.
●
The bandwidth of IP camera connected to the PoE via long network cable (100 to 300 meters)
●
cannot exceed 6 Mbps.
The allowed max. long network cable may be less than 300 meters depending on different IP
●
camera models and cable materials.
When the transmission distance reaches 100 to 250 meters, you must use the CAT5e or CAT6
●
network cable to connect with the PoE interface.
When the transmission distance reaches 250 to 300 meters, you must use the CAT6 network
●
cable to connect with the PoE interface.
3. Click Apply.
4. Connect PoE cameras to your device PoE interfaces with network cables.
What to do next
The connected PoE camera will be displayed in Configuration → Camera → Camera → IP Channel .
You can click its status to view live image.
Add Non-PoE Network Camera
You can use the PoE channel resource to connect a non-PoE network camera.
Steps
1. Go to Configuration → Camera → Camera → IP Channel .
2. Click of a channel with no linked network camera.
3. Select Adding Method as Manual.
Network Video Recorder User Manual
Figure 6-12 Add PoE Camera
50