HIKVISION DS-7600NI-K1 Series User Manual page 52

2. Configure the Live View parameters.
Live View Mode
Select the live view window division.
Dwell Time
The time to dwell in a camera before switching to next camera when auto-switch in live view
is enabled.
Event Output
Select the output to show event video.
Full Screen Monitoring Dwell Time
Set the time to show alarm event image.
Enable Audio Output
Turn on/off audio output for the selected video output.
Volume
Adjust the live view, playback, and two-way audio volume for the selected video output
interface.
3. Click Apply.
Configure Live View Layout
Steps
1. Go to Configuration → System → Live View → View .
2. Select Video Output Interface to configure.
3. Click to select a window and click a camera No. in the camera list you would like to display.
means no camera is displayed on the window.
4. Optional: Click
5. Click Apply.
Network Video Recorder User Manual
Figure 6-2 Live View-General
/ to start/stop live view of all the cameras in order.
38