HIKVISION DS-7600NI-K1 Series User Manual page 77

Region Entrance Detection
Region entrance detection function detects people, vehicle or other objects which enter a pre-
defined virtual region from the outside place, and some certain actions can be taken when the
alarm is triggered.
Steps
1. Go to Configuration → Event → Smart Event → Region Entrance .
2. Select Camera to configure.
3. Check Enable Region Entrance Detection.
4. Check Save VCA Picture to save the captured pictures of VCA detection.
5. Set the detection rules and detection areas.
1) Select Arming Area. Up to 4 arming areas are selectable.
2) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of
the detection region.
3) Adjust Sensitivity. Sensitivity: Range [0-100]. The higher the value is, the more easily the
detection alarm can be triggered.
6. Set the arming schedule.
7. Set the linkage actions.
8. Click Apply.
Region Exiting Detection
Region exiting detection function detects people, vehicle or other objects which exit from a pre-
defined virtual region, and some certain actions can be taken when the alarm is triggered.
Steps
1. Go to Configuration → Event → Smart Event → Region Exiting .
2. Select Camera to configure.
3. Check Enable Region Exiting Detection.
4. Check Save VCA Picture to save the captured pictures of VCA detection.
5. Set the detection rules and detection areas.
1) Select Arming Area. Up to 4 arming areas are selectable.
2) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of
the detection region.
3) Adjust Sensitivity. Sensitivity: Range [0-100]. The higher the value is, the more easily the
detection alarm can be triggered.
6. Set the arming schedule.
7. Set the linkage actions.
8. Click Apply.
Network Video Recorder User Manual
63