Why Is The Video Recorder Notifying Risky Password After A Network Camera Is Added; Why Is The Video Recorder Notifying The Stream Type Is Not Supported; How To Confirm The Video Recorder Is Using H.265 To Record Video; Why Is The Video Recorder Notifying Ip Conflict - HIKVISION DS-7600NI-I2 Series User Manual

Network Video Recorder User Manual
24.3.2 Why is the video recorder notifying risky password after a network camera
is added?
Reason
The camera password is too weak.
Solution
Change the camera password.
Warning
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.

24.3.3 Why is the video recorder notifying the stream type is not supported?

Reason
The camera encoding format mismatches with the video recorder.
Solution
If the camera is using H.265/MJPEG for encoding, but video recorder does not support H.265/
MJPEG, change the camera encoding format to the same as video recorder.

24.3.4 How to confirm the video recorder is using H.265 to record video?

Solution
Check if the encoding type at live view toolbar is H.265.

24.3.5 Why is the video recorder notifying IP conflict?

Reason
The video recorder uses the same IP address as other devices.
Solution
Change the IP address of video recorder. Ensure it is not the same as other devices.
95