Event Configuration; Normal Event - HIKVISION DS-7600NI-K1 Series User Manual

6.5 Event Configuration

6.5.1 Normal Event

Motion Detection
Motion detection enables the video recorder to detect the moving objects in the monitored area
and trigger alarms.
Steps
1. Go to Configuration → Camera → Motion Detection .
2. Select a camera.
3. Check Enable.
4. Set the motion detection area.
- Click Draw Area or Clear to draw or clear areas. The first area is set as full screen by default.
- Click Full Screen to set the motion detection area as full screen. You can drag on the preview
window to draw motion detection areas.
5. Adjust Sensitivity. Sensitivity allows you to calibrate how readily movement triggers the alarm. A
higher value results in the more readily to triggers motion detection.
6. Set analysis mode as AI or PIR.
AI
The motion detection event will be analyzed by your device.
PIR
The motion detection event will be analyzed by certain analog PIR cameras.
7. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered
by human or vehicle.
8. Set the arming schedule. Refer to Configure Arming Schedule for details.
9. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
10. Click Apply.
Video Tampering
Trigger alarm when the lens is covered and take alarm response actions.
Steps
1. Go to Configuration → Event → Normal Event → Video Tampering .
Network Video Recorder User Manual
56