Device Management; Switch; Non-Video Event - HIKVISION HiWatch Series User Manual

5.4 Device Management

5.4.1 Switch

Add and manage switches.
Quick Add Switch
Quick add switch(es) in the same network segment with the video recorder. If the switch is not
activated, it will be added with the channel default password.
Steps
1. Go to Configuration → Device Management → Switch.
2. In the Online Device List, check the switch(es) to be added and click Add to add switch(es) in the
same network segment with the video recorder using the channel default password.
Add Switch Manually
Steps
1. Go to Configuration → Device Management → Switch .
2. In the Online Device List, click Add and set the parameters of the channel.
Parameter
IP Address
Management Port
User Name / Password
Use the Login Password
3. Click Add and Continue and repeat operation until all device have been added.
4. Click Add.

5.4.2 Non-Video Event

Configure non-video event.
Steps
1. Go to Configuration → Device Management → Non-Video Event.
2. Select the device.
Network Video Recorder User Manual
Table 5-1 Channel Parameter Description
The IP address of the switch.
It is recommended to keep the default configuration.
The user name / password of the switch.
Use the login password of the video recorder to add the switch.
Description
34