Login; Set Unlock Pattern - HIKVISION DS-7600NI-K1 Series User Manual

1.2 Login

1.2.1 Set Unlock Pattern

Admin user can use the unlock pattern to login. You can configure the unlock pattern after the
device is activated.
Steps
1. Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the
pattern is done.
Note
The pattern shall have 4 dots at least.
●
Each dot can be connected for once only.
●
2. Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.
Network Video Recorder User Manual
Figure 1-1 Activation
2