Note
All parameters should be the same as the PTZ camera.
●
For the Coaxitron camera/dome connected, you can select the PTZ protocol to UTC
●
(Coaxitron). Ensure the selected protocol is supported by the connected camera/dome.
The AHD and HDCVI cameras support coaxitron control.
●
Selecting Coaxitron protocol will make other parameters unavailable, including baud rate, data
●
bit, stop bit, parity and flow control.
4. Click OK.
2.2.2 PTZ Control Panel Introduction
/
/
/
2.2.3 Customize Preset
Set a preset location where the PTZ camera would point to when an event occurs.
Steps
1. Preview a camera in live view and click
2. Select a desired preset in preset list.
3. Use direction buttons to wheel the camera to required locations. Adjust zoom and focus as your
desire.
4. Click
.
Network Video Recorder User Manual
Table 2-3 PTZ Panel Description
Icon
Direction buttons, and the auto-cycle button.
The speed of the PTZ movement.
Zoom -/+.
Focus -/+.
Iris -/+.
on shortcut menu.
8
Description