HIKVISION DS-7600NI-K1 Series User Manual page 47

2. Configure the event detection and select the channels to trigger the recording when an event
occurs.
3. Go to Configuration → Record → Parameter .
4. Set the continuous main stream/sub-stream recording parameters for the camera. Refer to
Configure Recording Parameter for details.
5. Go to Configuration → Record → Schedule .
6. Select recording type as Event. Refer to Edit Schedule for details.
Edit Schedule
Steps
1. Go to Configuration → Record → Schedule .
Continuous
Continuous recording.
Event
Recording triggered by all event triggered alarm.
2. Select a camera in CameraNo.
3. Check Enable.
4. Configure the recording schedule.
Edit a. Click Edit.
Schedule b. Select a day to configure in Weekday.
c. To set an all-day recording schedule, check All Day and select schedule type.
d. To set other schedules, uncheck All Day, and set Start/End Time and schedule
Network Video Recorder User Manual
Figure 5-13 Recording Schedule
type.
33