Chapter 5 Configuration (Easy Mode)
Easy mode contains basic configurations. Go to Configuration , and click Easy Mode.
5.1 System Configuration
5.1.1 General
You can configure the output resolution, system time, mouse pointer speed, etc.
Steps
1. Go to Configuration → System → General .
2. Configure the parameters as your desire.
Enable Wizard
The wizard will pop up after the device starts up.
Enable Password
You need to enter password for authentication if the device automatically logged out.
Enable NTP
Network time protocol (NTP) is a networking protocol for time synchronization. The device
can connect to NTP (network time protocol) server to sync time.
Interval (min)
Time interval between two time synchronization with NTP server.
Network Video Recorder User Manual
Figure 5-1 General Settings
17