Chapter 7 Maintenance; Restore Default; Search Log; Advanced Settings - HIKVISION DS-7600NI-K1 Series User Manual

7.1 Restore Default

Steps
1. Click at the upper-right corner.
2. Select the restoring type.
Simple Restore
Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the
factory default settings.
Factory Defaults
Restore all parameters to the factory default settings.
Restore to Inactive
Restore the device to the inactive status, and leave all settings unchanged except restoring
user accounts.
3. Click Yes. The device will reboot automatically.

7.2 Search Log

The operation, alarm, exception and information of video recorder can be stored in logs, which can
be viewed and exported at any time.
Steps
1. Go to Maintenance → More .
2. Set the search conditions.
3. Click Search.

7.3 Advanced Settings

Steps
1. Go to Configuration → Network → Advanced Settings .
2. Configure the parameters as your desire.
RTSP
You can specifically secure the stream data of live view by setting the RTSP authentication.
RTSP Authentication Type
Network Video Recorder User Manual

Chapter 7 Maintenance

74