HIKVISION DS-7600NI-K1 Series User Manual page 63

If the connected device is an encoding device with multiple channels, you can choose the
channel to connect by selecting the channel port No. in the drop-down list.
3. Click OK.
Example
Enter an example that illustrates the current task (optional).
What to do next
Enter the tasks the user should do after finishing this task (optional).
Upgrade Network Camera
The Network camera can be remotely upgraded through the device.
Before You Start
Ensure you have inserted the USB flash drive to the device, and it contains the network camera
●
upgrade firmware.
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Steps
1. Go to Configuration → Camera → Camera .
2. Click .
3. Click Yes to confirm.
4. Select the camera upgrade firmware from your storage device.
5. Click Upgrade to start upgrading. The camera will restarted automatically after upgrade
completed.
Add Network Camera Through PoE
The PoE interfaces enable the device to transfer electrical power and data to connected PoE
cameras. And the PoE interface supports the Plug-and-Play function. Connectable PoE camera
number varies with device models. If you disable a PoE interface, you can also use it to connect to
an online network camera.
Add PoE Camera
Steps
1. Go to Configuration → Camera → Camera → PoE Settings .
2. Enable or disable long network cable mode by selecting Long Distance or Short Distance.
Long Distance
Long-distance (100 to 300 meters) network transmissions via PoE interface.
Short Distance
Network Video Recorder User Manual
49