User; Network Configuration; Tcp/Ip - HIKVISION DS-7600NI-K1 Series User Manual

Configure Channel-Zero Encoding
Enable the channel-zero encoding when you need to get a remote view of many channels in real
time from a web browser or CMS (Client Management System) software, in order to decrease the
bandwidth requirement without affecting the image quality.
Steps
1. Go to Configuration → System → Live View → General .
2. Set Video Output Interface as Channel-Zero.
3. Go to Configuration → System → Live View → Channel-Zero .
4. Check Enable Channel-Zero Encoding.
5. Configure Frame Rate, Max. Bitrate Mode, and Max. Bitrate. The higher frame rate and bitrate
settings result in higher bandwidth requirement.
6. Click Apply.

6.1.3 User

Refer to User for details.

6.2 Network Configuration

6.2.1 TCP/IP

TCP/IP must be properly configured before you operate video recorder over network.
Steps
1. Go to Configuration → Network → General → TCP/IP .
2. Configure network parameters.
Working Mode
Multi-address Mode
Network Video Recorder User Manual
Figure 6-3 Channel-Zero
39