Operating Errors; Information Reporting And Troubleshooting - Meiko UPster H 500 Operating Instructions Manual

Operating Instructions UPster H 500 / H 500S
Figure 2: Information display
Information displays can be cleared by pressing the confirmation key.
Provided that the machine function is restored, the next program sequence will begin.
The information display can also be deleted by pressing the "Off" key.
Information indicator (extract)
9735020
18

Operating errors

Despite being expertly designed, the machine may develop minor faults which are usually
easy to eliminate. This section explains a number of possible problems and how you can
deal with them yourself.
Always de-energise the system before carrying out work on the open machine. Switch
the machine off completely via the on-site circuit breaker.
Should any of the operational faults described arise repeatedly, their cause must be
established in each case.
Faults not described here can generally only be resolved by a technician or electrician.
Please contact your factory representative or authorised dealer.

18.1 Information reporting and troubleshooting

Info No. Description
120 Emergency program active
Restricted washing possible.
121 Hood not closed
122 Incorrect password / no authori-
sation
123 Factory setting parameter list
420 Shortage of rinse aid
520 Shortage of detergent
Design and construction subject to change without prior notice!
Page
Possible cause
No boiler / tank heating
No fresh water supply
Check system
Check connection S1
Change microswitch
Check microswitch adjustment
Replacing a defective I/O circuit board
Enter code once again
Switch the power supply on/off within 5
minutes to reset parameters to factory
settings. This will be rejected and pa-
rameters will be retained.
Information 123 will disappear
If the warewashing machine is ready for
operation, a shortage of rinse agent will
be signalled (only if there is a built-in
warning system).
If the warewashing machine is ready for
operation, a shortage of detergent will
be signalled (only if there is a built-in
warning system).
35 42
of
Confirmation key
On/Off button