Assembly Warnings - Tecnosystemi PICO CLEAN WI ACD100025 User Manual

ASSEMBLY WARNINGS

The recovery unit must be
disconnected from the mains
supply before carrying out any
installation or repair operation.
Do not place any radiators or other
devices near the power cord of the
recovery unit.
When installing the recovery
unit, follow the specific safety
regulations for electrical
equipment.
Do not change the length of the
power cord at your own discretion.
Do not bend the power cord. Do
not damage the power cord.
SAFETY OPERATING WARNINGS
Do not touch the controls and the
remote controls with wet hands. Do
not perform maintenance operations
on the recovery unit with wet hands.
Do not block the air duct, when the
recovery unit is on.
Do not let children use the
recovery unit.
Keep explosive and flammable
products away from the recovery
unit.
In the event of unusual noises or
smoke, disconnect the recovery
unit from the wall outlet and contact
customer service.
Multi - Zone
Air Control System
Instruments &
Ventilation
Tools
Solutions
Accessories
For Heating
The recovery unit must not be used
outside the temperature range,
indicated in the user manual,
or in aggressive or explosive
atmospheres.
Do not use damaged equipment
or wires to connect the recovery
unit to the mains.
Carefully remove the recovery
unit from the packaging.
Use the recovery unit only
in accordance with the
manufacturer's specifications.
Do not wash the recovery unit
with water. Protect the parts of
the recovery unit from water
seepage.
Disconnect the recovery
unit from the mains before
maintenance.
Do not damage the power cord
when using the recovery unit.
Do not place objects on the
power cord.
Do not open the recovery unit
during operation.
Make sure that the air emitted
by the recovery unit is not
directed at naked flames or
candles.
21