ITech IT-M3900D Series User Manual page 42

•
If you want to remotely control the instrument using the built-in web server, you
must enable the web service. See
•
The format of the address entered in the address bar of the browser is http://
192.168.0.100. The specific IP address is subject to the actual instrument
settings.
The opened page is displayed as follows:
The homepage of different models are different. The actual shown page shall
be subject to the connected instrument.
You can select different pages by clicking the buttons shown in the navigation
bar on the left side of the window. The detailed descriptions are as follows.
•
Home：Web home interface, displays the model and appearance of the
instrument;
•
Information: Displays the serial number of the instrument and more system
information as well as LAN configuration parameters;
•
Web Control: Enables the Web control to begin controlling the instrument.
This page allows you to monitor and control the instrument;
•
Manual: Go to the ITECH official website and view or download the relevant
documents.
•
Upload: Performs a system upgrade.
Click CONNECT to connect the PC with the instrument, then click BROWSE
to select the system upgrade installation package (for example, itech_
3900_P.itech), and then click UPLOAD performs the upgrade operation.
After the upgrade is complete, the instrument needs to be restarted.
Copyright © Itech Electronic Co., Ltd.
Inspection and Installation
2.5.2 LAN Interface for details.
30