Installation - BORETTI MLBC45 User's Manual & Installation Manual

22. Installation

This information is exclusively for the installer who is responsible for assembly
and electrical connection. The manufacturer will not accept liability for possible
damage caused if you install the oven yourself.
22.1 Before installation
* To handle the oven, use the grips at the sides. Do not use the door handle to lift
the oven.
* Do not install the oven behind decorative doors. This can cause it to overheat.
* When installing the oven under a counter, follow the instructions for installing it.
* In general, protruding elements (furniture reinforcements, pipes, socket bases,
etc.) at the back of the unit must be avoided.
* When the base of the main power socket is inside the unit in which the oven is
installed, this must be done in the shaded area.
* The unit in which the oven is installed and adjacent units must withstand
temperatures higher than 85 ºC.
* The installation instructions must be ad-hered to strictly. If not, the oven's
ventilation circuit may become blocked, causing high temperatures that could
damage the kitchen unit and the appliance itself.
* For this purpose, check the unit measurements and those of the holes to be
drilled in the units, as shown in the following figures:
90
40