BORETTI MLBC45 User's Manual & Installation Manual page 35

19.3 Dismantling the side supports
1. Remove all accessories from inside the oven.
2. Completely loosen the nut at the front of
the fastening element (A), pull the supports
forward (B) and remove them.
19.4 Assembling the supports
1. Insert the rear notch into the rear fastening nut.
2. Fix the front fastening nut (C) in the front notch
of the support.
3. Secure the support with the nut (D) and turn
until it is fully adjusted (E).
Warning!
Failure to secure tightly the support with the
nuts may lead to overheating and damages.
19.5 Cleaning the oven door
19.5.1 Dismantling/assembling the interior glass of the door
Warning!
If dismantling the glass panes with the door fitted in the oven, always do
it with the hinge in the locked position. If not, the door will close and the
unmounted glass panes could break and cause injury.
Depending on the model, your oven may have 1 or 3 panes of glass. Follow the
instructions for the type of door your oven has.
1. Using your fingers, press the buttons located at the top of both sides of the
oven door.
35