BORETTI MLBC45 User's Manual & Installation Manual page 36

2. Keep them pressed and pull on the plastic seal above the door.
3. Remove the glass panes from the door. Clean them with a glass cleaner or
soap and water and a soft cloth.
Warning!
Pay attention to the order and position of the glass panes when removing
them as they must be reassembled in the same order and position when
you have finished cleaning them.
4. Once clean, insert pane no. 3 into the same position so that the
TERMOGLASS indication printed on it is visible as shown in following image.
5. Reattach the top seal of the door, making sure that the side tabs fit into
their housings.
Warning!
Never switch the oven on if any of the glass panes on the door are missing.
19.6 Changing the oven light bulb
Warning!
Make sure the oven has been disconnected from the mains before
changing the bulb.
The replacement bulb must withstand temperatures up to 300 ºC. You can order
them from the Technical Assistance Service Department.
36