Table of Contents
Advertisement
2. Safety
Abstract
This section describes what you have to consider for your own safety. You will learn the structure and identifica-
tion of safety instructions. Read this important section attentively!
2.1 Instructions for the operator
2.1.1 General information
2.2 Safety instructions in the
operating manual
6
All our pumps are professionally packed before they leave our
warehouse to avoid damage during transport.
If, after carefully unpacking and inspecting the shipment, you
Unpacking
however find damage, you must promptly inform the shipping
agent (railway, post office, lorry driver, shipping line, etc.).
Your claim should be filed with the shipping agent. The ship-
ping risk passes to the customer as soon as the shipment
leaves our warehouse.
If the pump is not put into service immediately, it is important
Storage
that it is stored properly to ensure that it will function correctly
later. This is just as important as proper installation and main-
tenance.
The pump must be protected from cold, moisture, and dust as
well as from mechanical influences.
Specially trained personnel is required to install and maintain
the pump properly.
The operating manual contains all the basic information re-
Read safety instructions!
quired for the set-up, operation, and maintenance of the
pump. The installer as well as the technical personnel or op-
erator responsible for the pump must therefore read this man-
ual before installing and starting the pump. The operating
manual must always be available at the site where the ma-
chine/system is being used. Not only the general safety in-
structions presented in this section but also the specific safety
instructions in later sections must be followed.
Safety
BA.017.BYY.001.01.10.GB
Advertisement
Table of Contents
Need help?
Do you have a question about the durietta I Bloc and is the answer not in the manual?